Important Points to Remember from IS Codes for @Civil Engineering Interview by Civil Engineer Mukesh Sah

Join us on Youtube (Subscribers - 730K) Join Now
Join us on WhatsApp Join Now
Join us on Facebook Join Now
Join us on Telegram Join Now
Join us on Instagram Join Now
Join us on Pinterest Join Now

Important Points to Remember from IS Codes for Civil Engineering Interview

Q1. What is Fine Aggregate?

Answer: As per IS 383, Aggregate most of which passes 4.75 mm IS Sieve.

Q2. What is Coarse Aggregate?

Answer: As per IS 383, Aggregate most of which retained on 4.75 mm IS Sieve.

Q3. What is All-in-Aggregate?

Answer: As per IS 383, Material composed of both fine aggregate and coarse aggregate is known as All-in-Aggregate.

Q4. What is the minimum curing period for Super Sulphate Cement?

Answer: The minimum curing period for Super Sulphate Cement is 7 days.

Q5. Convert 1 Soot into millimetre?

Answer: 1 soot = 3.175 mm

Q6. What is Anchorage Length?

Answer: As per IS Code 13920: 2016, Clause – 6.2.5, Anchorage length equals to development length of the bar in tension and plus 10 times bar diameter minus the allowance for 90 degrees bend.

Q7. What should be the spacing considered when we use coupler in a longitudinal reinforcement bar?

Answer: As per IS Code 13920: 2016, Clause – 6.2.6.2 (b), The spacing between adjacent longitudinal bars shall be based also on the outer size of the coupler to allow easy flow of concrete.

If You Want Detailed Knowledge Then Watch My Video On YouTube Channel: Learning Civil Technology.  I Am Telling This Because Many Important Points I Have Covered During Making Of Video, So If You Want To Know In Detail Then Watch My Video On YouTube Which is Given Below.

If you have liked this post of mine, then use the social link given below and share it among your friends on social media. Thanks
SHARE THIS POST, IF YOU LIKE IT !!
Padhega India Tab Hi Badhega India | पढ़ेगा इंडिया तब ही बढ़ेगा इंडिया

Leave a Comment