In this Post, we going to discuss some Important #Interview Question asked in Gammon India by #CivilEngineerMukeshSah.
Interview Question asked in Gammon India
Q1. What is a Two-way #Slab?
Answer: If the ratio of Longer Span to Shorter Span is less than 2, then it is called a Two-way slab.
Q2. What is Kentledge?
Answer: It is a dead weight used for applying a test load on a pile.
Q3. What is the #reinforcement criteria for the beam?
Answer: As per 13920: 2016 Cl. 6.2.1, Beam shall have at least two numbers 12 mm dia bar each at the top and bottom faces.
Q4. What is the percentage of water we can increase for every 25 mm slump?
Answer: As per IS 10262: 2009 Cl. 4.2, We can increase 3% for every additional 25 mm slump.
Q5. As per UK gallon, 1 Gallon equals how much liters?
Answer: 4.54 Litres
Q6. In one way slab, the Main bar is provided along which span?
Answer: Shorter span
Q7. How we can measure the thickness of the Plaster?
Answer: Bull mark is provided at a specific distance to make sure that the required thickness of the Plaster is uniform throughout.
Q8. In plastering, What is known as 2nd coat?
Answer: Floating coat
Q9. What is the specific gravity range of Bentonite slurry during Piling?
Answer: 1.05 to 1.12
Q10. What is the working load?
Answer: The load assigned to a pile as per design.
- Surveying Q & A for Freshers
- Top 20 Interview Walk-In Q & A for Civil Engineers
- Interview Question asked in Shapoorji
- Basic Interview Q & A For Civil Engineers
- Civil Engineers Interview Q & A
- HR Interview Q and A For Freshers – Part 2
- TOP 10 HR Interview Q and A FOR FRESHERS
- Volume Of Different Shapes
- AREA OF DIFFERENT GEOMETRICAL SHAPES
Q11. What is the use of the Damp Proof Course?
Answer: It prevents moisture from rising up the wall from the ground.
Q12. What is a small and large diameter pile?
Answer: As per IS 2911, Part – 1, Section – 2, Piles of 600 mm or less in diameter are called small diameter pile and Piles greater than 600 mm in diameter are called large diameter pile.
Q13. What is Friction Pile?
Answer: If the pile supports the load primarily by friction along its surface, then it is called Friction Pile.
Q14. How much CFT in 1 bag of Cement (50 KG)?
Answer: 1.225 Cubic Feet
Q15. What are the factors affecting the strength of concrete?
Answer: Quality of Raw Materials, Water – Cement Ratio, Coarse – Fine aggregate ratio, Aggregate – Cement ratio, Curing period, Temperature, Compaction of concrete.
Q16. What is the density of Ice?
Answer: 920 Kg per Cubic meter.
Q17. What is the Contour Line?
Answer: A line joining points of equal elevation is known as a Contour Line.
Q18. What is the least count of theodolite?
Answer: The difference between the value of the smallest division of the main scale and that of the smallest division of the vernier scale known as the least count of the theodolite. It is the least value that can be measured by theodolite.
Q19. What is the standard thickness of Ceiling Plaster?
Answer: 6 mm
Q20. What is a One-way slab?
Answer: If the ratio of Longer Span to Shorter Span is more than or equal to 2, then it is known as One way Slab.
I hope you find this information useful. If there is something that I have missed or I do not know, you can comment and tell me which I will try to rectify as soon as possible.
You can also follow me on Instagram, Telegram and Facebook page. Because many small things, which are very important from interview point of view, it is not possible to put here, I put all that on Instagram, Telegram and Facebook page. You can take it from there. You will find the links of all social media below.
INSTAGRAM | TELEGRAM | FACEBOOK PAGE
If you have liked this post of mine, then use the social link given below and share it among your friends on social media. Thanks
SHARE THIS POST, IF YOU LIKE IT !!
Padhega India Tab Hi Badhega India | पढ़ेगा इंडिया तब ही बढ़ेगा इंडिया
