Civil Engineers Interview Q & A | Basic Civil Engineering Knowledge

Top 20 Civil Engineers Interview Q & A | Basic #Civil Engineering #Knowledge

Join us on Youtube (Subscribers - 701K) Join Now
Join us on WhatsApp Join Now
Join us on Facebook Join Now
Join us on Telegram Join Now
Join us on Instagram Join Now
Join us on Pinterest Join Now

In this post, we will learn some important #Civil Engineers Interview Q & A

Civil Engineers Interview Q & A

Q1. What is ductility?
Answer: Ductility is the ability to deform under tensile stress.
Q2. What is the length of riser and tread in #staircase?
Answer:  Riser – 150 mm to 200 mm; Tread – 250 mm to 300 mm.
Q3. What is the slope of the #staircase?
Answer: As per IS 456:2000, the slope or pitch of stairs should be between 25 degrees to 40 degrees.
Q4. What do you mean by #Segregation?
Answer: Segregation is a separation of Cement, Sand from Aggregate.
Q5. What is the Initial and Final setting time of cement?
Answer: Initial – 30 mins; Final – 10 hours.
Q6. What is Bleeding in #concrete?
Answer: Bleeding is one form of segregation, where water comes out to the surface of the concrete.
Q7. What is the name of the machine to do a Compression test?
Answer: Universal Testing Machine (UTM)
Q8. What is the function of #stirrups?
Answer: Stirrups are provided to resist the Shear force. It also holds the main bars in position.
Q9. What is the total length of the steel bar?
Answer: 12 m

Q10. What is Soil Reinforcement?
Answer: Soil reinforcement is the act of improving soil strength to enable it to support or carry more load.

Q11. Why foundations are placed below ground level?
Answer: To increase the stability of the structure.
Q12. What is the use of the 3-4-5 method in construction sites?
Answer:  This method used for setting out plans accurately at the right angle.
Q13. What is the full form of #DPC?
Answer: Damp Proof Course.
Q14. What is the minimum recommended diameter of bored cast-in-situ pile?
Answer: As per [IS 2911, Part – 1, Section – 2], the minimum recommended diameter of the pile is 450 mm.
Q15. What is the full form of #RCC?
Answer: Reinforced Cement Concrete.
Q16. What is the angle of Hook in Stirrups?
Answer: 135 degrees.
Q17. What is the factor that helps in converting Wet concrete volume to Dry concrete volume?
Answer: 1.54
Q18. How to Convert Cubic meter to Cubic Feet?
Answer: Multiplying by 35.3147
Q19. What is the direction of the Main & Distribution bar in RCC Slab?
Answer: Main bar in Shorter span and Distribution bar in a longer span.

Q20. What is End Bearing Pile? Answer: If the pile supports the load primarily by resistance developed at the pile tip or base, then it is called End Bearing Pile.
I hope you find this information useful. If there is something that I have missed or I do not know, you can comment and tell me which I will try to rectify as soon as possible.
If you have liked this post of mine, then use the social link given below and share it among your friends on social media. Thanks
SHARE THIS POST, IF YOU LIKE IT !!
Padhega India Tab Hi Badhega India | पढ़ेगा इंडिया तब ही बढ़ेगा इंडिया

RECOMMENDED POSTS FOR YOU:

1 thought on “Top 20 Civil Engineers Interview Q & A | Basic #Civil Engineering #Knowledge”

Leave a Comment